Advanced Hybrid Sealer

Advanced Hybrid Sealer

Advanced Hybrid Sealer

THE TILE DOCTOR ADVANCED HYBRID SEALER is an Ultra Premium all Purpose Sealer, the unique Water / Solvent Blend Formulation provides a dual performance not available in any other single formula sealer. No-sheen impregnating sealer formulated for professional protection of the natural character and appearance of unsealed surfaces and natural stone. The low VOC content meets regulations in all 50 states. The layer of protection forms a vapor permeable barrier that resists water, grease, oil, stains and dirt.

 

The formula is non-yellowing and is weather and UV resistant. May also be used as a pre-grout sealer and for sealing grout joints. The advanced formula may be applied immediately after grouting, no waiting is required.

 

APPLY RIGHT AFTER GROUTING, RAPID RE-COAT TIME, LIGHTNING FAST UP-TIME

 

COVERAGE: {500-2500 square feet per gallon per coat} Coverage will vary depending on type of stone, porosity and texture of surface absorption, temperature, humidity and method of application. VOC = 89 g/L.

 

Uses

Use on interior/exterior natural stone, marble, granite, limestone, brick, slate, unglazed tile, grout and masonry surfaces. Works on most porous architectural substrates.

 

Application

Read entire label before using. Surface must be clean and free of existing sealers, waxes or other coatings. Apply and saturate surfaces using a paint brush, paint roller, paint pad/applicator, clean towel or low pressure sprayer with no more than 25 psi. You also may buff sealer into stone surfaces. Note: Do NOT Aerosolize. If 2 or more coats are required, allow previous coat to be dry to the touch before applying additional coat. Multiple light coats will perform better than one heavy coat. Achieves a full cure in 24 hours. Some highly porous surfaces may require an additional coat after full cure. Floor can be walked on as soon as final coat is dry to the touch and any residue is removed.

 

GROUT RELEASE APPLICATION: For new installations, follow application procedure above. Allow to cure a minimum of 30 minutes before applying grout. TEST A SMALL AREA according to application instructions with a 24-hour cure time to determine desired results. Test for stain repellency using likely contaminants.

 

Maintenance

The Tile Doctor Advanced Tile and Stone Cleaner is recommended for surface cleaning.

 

Handling and Storage

Close container tightly after each use. Store in original container in a cool, dry area. Dispose of residue or any unused leftover product in accordance with applicable federal, state, and local requirements.

 

Limitations

Do not allow sealer to come in contact with any non-recommended surface as product is not completely removable. Sealers and fi nishes should not be used before or after use of Advanced Hybrid Sealer. Sealer will not prevent surface wear or protect from acids or caustic chemicals.

 

Cautions

Use in well-ventilated areas. Do not use this product with high pressure sprayers. Use low pressure sprayers with no more than 25 psi. Do not aerosolize. Avoid prolonged skin contact. Rubber gloves and eye protection should be worn during application. IF INGESTED: Seek medical attention immediately. EYE CONTACT: Flush with large amounts of water for 10-15 minutes. Consult a physician if needed. SKIN CONTACT: Wash immediately with soap and water. Remove contaminated clothing, If irritation persists, seek medical attention. INHALATION: relocate to fresh air. If symptoms persist, seek medical attention. For technical assistance or more information, please call 877-290-9015 Monday through Friday 8:00 a.m. to 5:30 p.m. Eastern Time. KEEP OUT OF REACH OF CHILDREN AND PETS.

 

MSDS Advanced Hybrid Sealer

pdf-iconMSDS_Advanced_Hybrid_Sealer